Mildenhall Roofers handles commercial roof repairs and replacements for businesses near Red Lodge, giving straightforward advice on what to do when a roof problem strikes.
Call any time. Calls are answered day and night and passed straight to our roofers.
When a commercial roof fails - whether it is a slow internal water stain that has been growing for weeks or a sudden leak during a storm - the period before a roofer arrives matters. What you do in those hours and days can limit secondary damage and keep your business operational. Equally, what you should not attempt yourself is just as important to know.
We carry out flat and pitched commercial roofing work near Red Lodge and across West Suffolk, serving properties in Mildenhall, Barton Mills, Icklingham, Culford, Cavenham, Lackford, Holywell Row, West Row, Herringswell, Elveden, Kentford and Risby. We cover commercial, agricultural and light industrial buildings - from warehouse roof repairs to full membrane replacements on retail units.
Most commercial roof leaks are not dramatic. They tend to present as a water stain on a ceiling board, a drip through a light fitting or a patch of damp appearing on an internal wall near a parapet. These signs often indicate that water has been entering the building for some time before it became visible - flat roofs, in particular, allow water to travel horizontally across the underside of the membrane and through insulation before it finds a way through to the interior.
On pitched commercial and agricultural roofs, leaks are more likely to track down a rafter or purlin and drip from a specific point. In both cases, the internal drip point is rarely directly below the external entry point, which is why self-diagnosis from inside is unreliable.
These steps are practical, achievable without specialist skills and can significantly reduce the cost of the eventual repair by limiting secondary water damage.
The immediate priority is to move anything at risk away from the affected area. Stock, machinery, paperwork and electrical equipment should all be relocated if there is any chance of water reaching them. If water is dripping near electrical fittings, switch off the relevant circuit at the distribution board. Do not wait to see whether the fitting is actually getting wet - switch it off and leave it off until a qualified person has checked it.
Electrical damage from water ingress is common in commercial properties with flat roofs and recessed lighting. It is also the most expensive secondary consequence of a leak, frequently exceeding the cost of the roof repair itself.
Use buckets, trays or plastic sheeting spread on the floor to catch dripping water. If you have polythene sheet available, draping it over shelving or equipment below the affected area is worthwhile even if active dripping has not yet started. Commercial premises often have more ceiling void between the roof deck and the finished ceiling than you might expect, and water can spread across a large area of ceiling tile before it finds somewhere to come through.
If you can safely access the ceiling void (via a hatch, not by cutting), placing a tray or container at the actual drip point within the void prevents water running along a joist or rail and appearing at a point further from the entry than you might expect.
Photograph and, if relevant, video the internal signs of the leak - water stains, drip points, the extent of affected ceiling or wall. Note when the leak started, whether it coincided with rain or a recent storm, and whether it has changed in character (intermittent versus continuous, worsening or stable). This information is useful for the roofer and may be needed for any other purposes relating to the building.
If you have access to the flat roof from inside the building via a roof hatch, you can photograph the surface from the hatch opening - but do not walk out onto the roof yourself (see below).
There is a temptation to try and fix a commercial roof leak while waiting for a roofer. In most cases this is not safe, and in many cases it makes the eventual repair more expensive. Here is what to avoid.
Commercial flat roofs are not universally load-bearing across their whole surface. Many are built with a membrane laid over insulation boards and a deck - which may be timber, metal or concrete. Older or water-damaged decks can be structurally weakened in ways that are not visible from above. Walking on a flat roof without knowing its construction and structural state is a genuine safety risk. Without edge protection, the risk is compounded significantly.
Access to a flat commercial roof for any purpose other than an emergency requires the right equipment. A roofer attending to carry out a survey or repair will work from proper access - a scaffold, a mobile elevated work platform or a secured roof ladder with a ridge hook - and will understand the roof's structural condition before putting weight on it.
Liquid sealants, bitumen-based patch compounds and self-adhesive repair tapes are sold as DIY solutions for roof leaks. On a commercial felt or membrane roof, applying these products without proper preparation creates a problem for the roofer who comes to carry out the actual repair. Sealants applied over a wet or dirty surface do not bond adequately and peel back, leaving a raised, uneven area that makes it harder to identify the original failure point and harder to apply a properly bonded repair. The product may appear to have worked for a few weeks before the underlying failure continues to admit water.
If the leak is significant and you feel you need to do something while waiting, a temporary patch with a loose sheet of EPDM or heavy polythene weighted at the edges can reduce water ingress without bonding anything to the existing membrane surface. This does not make a permanent repair, but it avoids complicating the job for the roofer.
It is natural to want to tidy up before someone comes to look at a problem, but on a roof, the pattern of debris, ponding and organic growth can give a roofer useful information about drainage behaviour and water movement on the surface. A roof outlet blocked by leaves may be directly relevant to why the membrane has failed nearby. Leave the roof as you found it and let the roofer carry out their assessment from what is actually there.
When you contact us about a commercial roof problem near Red Lodge, it helps to have the following information ready:
This information helps us give you a realistic picture of what is likely involved and what we will need to bring with us to assess or carry out the repair. Call us to talk through the problem and arrange a survey of your commercial premises near Red Lodge.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.