Urgent leak or storm damage? Call 01638 597994 - answered day and nightUrgent leak? Call 01638 597994
Mildenhall Roofing Specialists
01638 597994 Get a Quote →
Roof Replacements

Roof Replacements in Mildenhall

A full roof replacement is the right call when repairs are no longer cost-effective - whether your tiles are failing, your felt has given out, or storm damage has gone too far. We strip back to the structure, deal with anything rotten or damaged beneath, and lay a new roof built to last. Covering Mildenhall and the surrounding villages.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01638 597994
What's involved

How we handle roof replacements

When a Repair Is No Longer Enough

Most roofs can be patched and maintained for years, but there comes a point where the cost of repeated repairs outweighs the price of starting fresh. If your roof is shedding tiles regularly, leaking in more than one place, or the felt beneath the tiles has broken down completely, a full replacement is usually the more sensible and more economical decision in the long run.

Properties across Mildenhall and the surrounding villages - including Barton Mills, Icklingham and West Row - include a wide mix of roof types, from tiles and slate to flat felt roofs on extensions and garages. Each type ages differently and needs a different approach when the time comes to replace it.

What a Full Roof Replacement Involves

The first job is a proper inspection of the existing structure before a single tile comes off. Rafters, purlins and joists can all suffer from rot, woodworm or movement over time, and any structural issues need to be addressed before the new roof goes on. Skipping this step is one of the most common reasons a new roof fails prematurely.

Once the structure is confirmed sound - or repaired where needed - the old covering is stripped back completely. On a pitched roof, new breathable roofing membrane is laid over the rafters, battens are fixed, and the new tiles or slates are hung from the ridge down. Lead or code-matched flashing is fitted at any abutments, valleys and around the chimney stack. Ridge tiles are bedded or dry-fixed depending on the system chosen.

On flat roofs - typically covering extensions, outbuildings and garages across properties in Herringswell, Cavenham and Elveden - the replacement process involves stripping the existing felt layers, checking the deck beneath for soft spots or damage, and laying a new waterproofing system. EPDM rubber membrane is a popular choice for flat sections because it is flexible, handles temperature changes well, and can last considerably longer than traditional felt when correctly installed.

Work that a professional replacement should always include:

  • Full inspection of the roof structure before work begins
  • Replacement of any damaged or rotten timber
  • New breathable underlay on pitched roofs
  • Correct fixing of battens at the right gauge for the tile or slate being used
  • Lead flashing at all junctions, valleys and around any chimney stacks
  • Ridge tiles bedded in mortar or mechanically fixed with a dry-fix system
  • Clearance of all waste and a clean site when the job is done

Pitched Roof Replacements

Pitched roofs on homes in Suffolk are most commonly covered with plain clay tiles, concrete interlocking tiles, or slate. Clay tiles from the Victorian and Edwardian period can last well over a century, but the mortar pointing, ridge and hip beds deteriorate long before the tiles themselves. Concrete tiles typically have a lifespan of 40 to 60 years; once they begin to powder, delaminate or become porous they retain moisture and add unnecessary weight to the structure.

When choosing a replacement material, it is worth considering the weight of what you are putting up. Swapping from heavy concrete tiles to a lighter natural slate or thin leading slate-effect tile can reduce load on older timbers. Your roofer should advise you on what the existing structure can safely carry and what local planning rules - if any - apply to your property type.

Slate roof replacements are common on older properties. Spanish or Welsh slate, or a quality fibre cement slate, all perform well in this part of Suffolk. The key differences are cost, expected lifespan and appearance. Natural Welsh slate is at the premium end but can last well over a hundred years when laid correctly.

Flat Roof Replacements

Flat roofs on extensions and garages in nearby villages tend to be older felt systems that were laid 20 or 30 years ago. Three-layer felt on a timber deck has a practical lifespan of around 15 to 20 years before it begins to split, blister and allow water to track into the property. When a felt flat roof is letting in water at multiple points, or the deck beneath is soft in patches, replacement is more cost-effective than further patching.

EPDM rubber roofing is increasingly the go-to system for flat roof replacements. It is applied as a single continuous sheet with no joins across the main field, which removes the most common failure points. It handles the freeze-thaw cycle that flat roofs in this part of Suffolk experience each winter, and it does not become brittle in the same way that felt does as it ages.

A flat roof replacement in Suffolk typically costs in the region of £70 to £120 per square metre, depending on the system used, the condition of the existing deck, and whether the deck itself needs replacing. Larger areas and straightforward access will generally sit toward the lower end of that range.

Chimney and Flashing Work During a Replacement

A chimney stack on a Suffolk property takes a significant amount of weathering. The flaunching - the mortar bed that holds the chimney pots - cracks and lifts, pointing erodes, and the lead flashing at the base of the stack lifts away from the brickwork. Any of these failures allows water into the roof void and down through ceilings.

When replacing a full roof, all lead flashing around chimneys, dormers and abutments should be replaced as part of the job rather than left in place. Reusing old lead over a brand new roof covering is a false economy that is likely to cause a leak within a few years.

Garage and Outbuilding Roofs

Garages and outbuildings across properties in West Row, Barton Mills and Mildenhall itself often have ageing felt or thin concrete tile roofs that have been overlooked for years. A sagging or failing garage roof can cause water damage to vehicles, tools and stored belongings, and if the structure is attached to the main house it can allow damp to track into the building. A replacement is usually a straightforward one or two day job depending on size.

Storm and Wind Damage

Properties in this part of Suffolk can be exposed to strong winds, and the flat, open landscape in this area offers little natural shelter. Storm damage typically shows as missing ridge tiles, lifted or cracked tiles, and torn underlay that then allows driving rain into the roof void. If a storm has left your roof visibly damaged, the first step is to get someone up there to assess the full extent before water causes secondary damage to your ceilings and timbers.

In cases where damage is widespread enough that replacing individual tiles is more expensive than stripping and starting again, a full replacement is the practical answer. If you suspect your home insurer may cover the cost, get a clear written scope of what work is needed before you contact them.

Choosing the Right Roofer for a Replacement in Mildenhall

A roof replacement is one of the largest single maintenance jobs a homeowner will spend money on. Before committing, ask any roofer you are considering for a detailed written quote that breaks down labour, materials and any additional structural work separately. Be cautious of quotes that do not include a site visit - it is not possible to price a replacement accurately from a photograph.

Ask what membrane system they intend to use, what batten gauge they will fix at, whether new lead will be installed at all flashings, and how they will handle any rotten timber discovered during the strip. A roofer who can answer these questions plainly and specifically is demonstrating genuine knowledge of the job.

We cover Mildenhall, Kentford, West Row, Barton Mills, Icklingham, Herringswell, Elveden, Cavenham, Lackford, Reach and Risby. Call us to arrange a roof survey and a clear, itemised quote for your replacement.

Itemised quote
Materials, labour, scaffold broken out
Fixed start date
With a daily schedule

Get your free quote

No obligation · We'll call you to arrange a free visit

By submitting you agree to being contacted about your enquiry. No spam, ever.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01638 597994
Questions

What people ask first.

For a standard three-bedroom semi-detached house, expect to pay between £4,500 and £9,000 for a full roof replacement including strip, new membrane, battens and tiling. Larger roofs, natural slate, or significant structural timber repairs will push the cost higher. A detailed survey is the only way to give an accurate figure for your specific property.
A typical pitched roof replacement on a three-bedroom semi-detached house in Suffolk costs roughly £5,000 to £9,000, depending on the size of the roof, the material chosen, and the condition of the timbers underneath. Flat roof replacements on extensions or garages generally cost between £70 and £120 per square metre. These figures cover stripping the old covering, replacing any rotten timber, laying new underlay, fitting new tiles or membrane, and replacing all lead flashing. Always ask for a written breakdown so you can see exactly what is included.
Larger jobs such as chimney repointing, replacing a section of lead flashing with scaffold access, or repairing storm damage across a wider area will cost more and need to be assessed individually. Getting an inspection first is the only reliable way to pin down the cost for your specific roof.
As a general guide, felt flat roof replacement runs from around £70 to £120 per square metre, while EPDM rubber membrane sits closer to £90 to £150 per square metre. A typical single garage roof of around 18 square metres would therefore cost roughly £1,200 to £2,700, though the final figure depends on the condition of the timber deck underneath and how much of it needs replacing. It is worth having the deck inspected before agreeing a price, as hidden rot can add to the scope of the work.
For a standard semi-detached or detached home, expect to pay somewhere in the region of £1,500 to £3,500 for a full UPVC roofline replacement. The final figure depends on the size of the property, how much access equipment is needed and whether any rafter feet need repair before the new boards can go on. A larger detached house with a complex roofline will sit at the higher end of that range.
For a standard domestic chimney stack in Suffolk, a full re-lead including soakers, step flashings, apron and back gutter typically costs between £400 and £900. Larger stacks, difficult access or additional repointing work will add to that figure. The only way to get an accurate price is a site visit, as the extent of the existing lead and the condition of the pointing both affect the cost.
A partial rebuild from the flashing line upwards on a standard house typically costs £800 to £1,800. A full stack rebuild or work on a taller property can reach £2,500 or more. Scaffold access, the number of pots and the extent of lead flashing work all affect the final figure, so a roof-level inspection before quoting is essential.
A chimney take-down in Mildenhall typically costs between £800 and £2,500 for a single stack, depending on the height, the number of courses to remove and the type of roof covering that needs to be made good afterwards. Always make sure the quote includes the full roof patch, not just the brickwork demolition. Taller stacks on two-storey properties or those with natural slate roofs tend to sit at the higher end of that range.
Other services

More from Mildenhall Roofers