Urgent leak or storm damage? Call 01638 597994 - answered day and nightUrgent leak? Call 01638 597994
Mildenhall Roofing Specialists
01638 597994 Get a Quote →
Roof Repairs

Roof Repairs in Mildenhall

From slipped tiles and cracked flashings to storm damage and leaking flat roofs, we carry out roof repairs across Mildenhall and the surrounding villages. We locate the source of the problem accurately before starting work, so the fix lasts rather than masking a deeper issue.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01638 597994
What's involved

How we handle roof repairs

Roof Repairs in Mildenhall and the Surrounding Area

A damaged roof rarely announces itself until water is already inside. Whether you have noticed a damp patch on a bedroom ceiling, a missing tile after a night of strong winds, or a chimney stack that has started to crumble, getting the problem assessed and fixed quickly limits the damage to the structure beneath. We carry out roof repairs across Mildenhall and the nearby villages of Barton Mills, West Row, Icklingham, Elveden, Cavenham, Lackford, Culford, Kentford, Herringswell and Risby.

Common Roof Problems We Fix

Suffolk roofs take a fair amount of weather through the autumn and winter months. The most common issues we deal with fall into a recognisable set of categories, though every roof is different and a proper inspection always comes first.

  • Slipped or broken tiles and slates - Clay and concrete tiles can slip when the nibs that hook them onto the batten wear away or the batten itself rots. Slate can fracture along natural grain lines, especially on older properties. A single missing tile exposes the felt or boarding beneath to water and UV damage.
  • Roof leaks - Leaks are not always directly above where the water appears inside. Water can travel along rafters or across the felt before finding a way through. Tracing the true entry point is the first step of any repair.
  • Lead flashing repairs - Flashing seals the junction between a roof slope and a wall, chimney, skylight or dormer. Lead is the most durable material for this, but it can crack with age, lift in frost, or pull away from the mortar chase. Repointing, re-soaking or replacing a section of flashing is a straightforward repair that stops a persistent drip at source.
  • Chimney repairs - Chimney stacks are exposed on all four sides. Pointing erodes, lead flashings deteriorate and chimney pots can crack or lean. A stack that has not been looked at in ten years or more is worth inspecting from close up, not just from the ground.
  • Flat roof repairs - Felt flat roofs are common on garages, extensions and bay window tops. Felt blisters, splits and lap joints that have opened up are all repairable, and in many cases a felt repair will extend the roof's useful life considerably. Where felt has failed across a large area, replacement with a modern torch-on system or EPDM rubber membrane is a longer-lasting solution.
  • Storm and wind damage - High winds lift ridge tiles, dislodge verge mortar and occasionally strip sections of felt from low-pitch roofs. After a significant storm it is sensible to have a visual inspection carried out even if you cannot see obvious damage from the ground, because minor displacement can worsen quickly in the next spell of wet weather.
  • Garage roof repairs - Single-skin garage roofs are particularly prone to felt failure and inadequate falls that allow water to pond. Repairs can range from patching a split section of felt to re-decking and recovering the whole roof.
  • Pitched roof repairs - Mortar bedding on ridge and hip tiles dries out and cracks over years of thermal movement. When it fails, tiles can shift and in some cases fall. Re-bedding and repointing ridge tiles is one of the most common pitched-roof repairs on houses built from the 1930s through to the 1980s.
  • Slate roof repairs - Natural slate and reclaimed slate are both found on older properties. Matching the size and thickness of existing slates matters for the look of the roof and for a weathertight fix. We source matching material before starting work rather than using whatever is nearest to hand.
  • Commercial roof repairs - Flat and low-pitch commercial roofs on industrial units, farm buildings and retail premises develop many of the same problems as domestic roofs. Working at height on larger structures requires the right equipment and a methodical approach to access.

What a Proper Roof Repair Involves

Good roof repair work starts with an accurate diagnosis. Applying a coat of sealant over a damp area without finding out why water is getting in is a short-term patch, not a repair. We inspect from the roof surface where safe to do so, and where necessary from inside the loft space as well, because the underside of the felt and the condition of the battens can tell you a great deal about what is happening above.

Once the source is confirmed, the repair method is chosen to match the roof type and material. On a tiled or slated pitched roof that means removing, sourcing and re-fixing the affected tiles or slates, checking the battens and felt for any secondary damage, and making good the surrounding area so that new fixings do not create fresh weak points. On a flat felt roof it means cutting back to sound felt before applying any patch or new section, because bonding over a blistered or damp surface will not hold.

Flashing repairs involve raking out old mortar from the chase, re-dressing the lead or cutting and fitting a new section, then pointing back with an appropriate mortar mix. Using the wrong mortar on a soft Suffolk brick can cause more damage than the original repair fixes, so material choice matters.

Why Not to Leave a Roof Problem Too Long

A small leak left through a winter can saturate insulation, rot roof timbers, damage plasterboard and, in worst cases, cause structural movement in a chimney stack or parapet wall. The cost of fixing a leak at source is almost always a fraction of the cost of repairing the secondary damage it causes. Even a dislodged ridge tile that is not yet leaking creates a gap where wind can get under the bedding of adjacent tiles and lift them.

More extensive repairs involving scaffold, chimney rebuilding or large flat roof sections will cost more than standard jobs.

Emergency Roof Repairs

When a storm causes sudden and serious damage, leaving the roof exposed is not an option. Temporary weatherproofing, such as heavy-duty sheeting fixed correctly to the roof structure, can protect a property while a permanent repair is arranged. If you have sustained storm damage, the priority is stopping further water ingress, and that is the first thing we will address.

What to Expect When You Call

We will ask you to describe what you have seen and, if possible, send a photograph. That lets us come to the job with the right materials rather than making a second visit to fetch parts.

When the repair is done, we will show you or tell you what was found, what was done to fix it, and whether there is anything else on the roof that needs attention in the near future. Honest information about the condition of the rest of the roof is more useful to you than a simple invoice and a wave goodbye.

Itemised quote
Materials, labour, scaffold broken out
Fixed start date
With a daily schedule

Get your free quote

No obligation · We'll call you to arrange a free visit

By submitting you agree to being contacted about your enquiry. No spam, ever.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01638 597994
Questions

What people ask first.

For a standard three-bedroom semi-detached house, expect to pay between £4,500 and £9,000 for a full roof replacement including strip, new membrane, battens and tiling. Larger roofs, natural slate, or significant structural timber repairs will push the cost higher. A detailed survey is the only way to give an accurate figure for your specific property.
A typical pitched roof replacement on a three-bedroom semi-detached house in Suffolk costs roughly £5,000 to £9,000, depending on the size of the roof, the material chosen, and the condition of the timbers underneath. Flat roof replacements on extensions or garages generally cost between £70 and £120 per square metre. These figures cover stripping the old covering, replacing any rotten timber, laying new underlay, fitting new tiles or membrane, and replacing all lead flashing. Always ask for a written breakdown so you can see exactly what is included.
Larger jobs such as chimney repointing, replacing a section of lead flashing with scaffold access, or repairing storm damage across a wider area will cost more and need to be assessed individually. Getting an inspection first is the only reliable way to pin down the cost for your specific roof.
As a general guide, felt flat roof replacement runs from around £70 to £120 per square metre, while EPDM rubber membrane sits closer to £90 to £150 per square metre. A typical single garage roof of around 18 square metres would therefore cost roughly £1,200 to £2,700, though the final figure depends on the condition of the timber deck underneath and how much of it needs replacing. It is worth having the deck inspected before agreeing a price, as hidden rot can add to the scope of the work.
For a standard semi-detached or detached home, expect to pay somewhere in the region of £1,500 to £3,500 for a full UPVC roofline replacement. The final figure depends on the size of the property, how much access equipment is needed and whether any rafter feet need repair before the new boards can go on. A larger detached house with a complex roofline will sit at the higher end of that range.
For a standard domestic chimney stack in Suffolk, a full re-lead including soakers, step flashings, apron and back gutter typically costs between £400 and £900. Larger stacks, difficult access or additional repointing work will add to that figure. The only way to get an accurate price is a site visit, as the extent of the existing lead and the condition of the pointing both affect the cost.
A partial rebuild from the flashing line upwards on a standard house typically costs £800 to £1,800. A full stack rebuild or work on a taller property can reach £2,500 or more. Scaffold access, the number of pots and the extent of lead flashing work all affect the final figure, so a roof-level inspection before quoting is essential.
A chimney take-down in Mildenhall typically costs between £800 and £2,500 for a single stack, depending on the height, the number of courses to remove and the type of roof covering that needs to be made good afterwards. Always make sure the quote includes the full roof patch, not just the brickwork demolition. Taller stacks on two-storey properties or those with natural slate roofs tend to sit at the higher end of that range.
Other services

More from Mildenhall Roofers