Whether you need a full roof replacement or a brand-new roof on an extension or outbuilding, we install pitched and flat roofs across Mildenhall and the surrounding villages. We work with slate, concrete and clay tiles, and EPDM rubber for flat areas.
Call any time. Calls are answered day and night and passed straight to our roofers.
A new roof is one of the largest investments you will make in a property. Whether your existing covering has reached the end of its life, you are building an extension, or you have just bought a house with a roof that was patched too many times, a full replacement is often the most cost-effective decision in the long run. We install new roofs on houses, bungalows, garages, outbuildings and commercial premises across Mildenhall and the surrounding villages.
A proper new roof is not simply new tiles on old battens. The work starts with a full strip of the existing covering down to the rafters. Every rafter is inspected for rot, insect damage or movement. Any timber that has softened or twisted gets replaced before anything else goes on top, because no tile or membrane can compensate for a weak structure underneath.
New roofing felt or a breathable membrane is laid over the rafters, followed by treated timber battens fixed at the correct gauge for the chosen tile or slate. Getting the batten gauge right is one of those details that separates a roof that performs well from one that lets water in after the first freeze. Tiles are then fixed according to the manufacturer's laying specification, with double-lap at the eaves and verges dressed and pointed to keep wind and driving rain out.
Lead or code-appropriate alternatives are dressed around chimneys, abutments and any roof penetrations. Ridge and hip tiles are bedded or mechanically fixed depending on the roof pitch and local exposure. On a pitched roof, ventilation is built in at the correct level to prevent condensation forming in the roof space, which is a common cause of premature timber decay in Suffolk properties.
Many homes were built with concrete interlocking tiles or plain clay tiles. Both have long service lives when properly laid, but concrete tiles can become porous and heavy over decades, and the nibs that hook them onto the battens can fail, leading to slippage. Natural slate roofs, more common on older properties, can last considerably longer but need matching replacement slates when re-roofed to maintain both performance and appearance.
When we quote for a new pitched roof, we will discuss the options that suit the property, including whether a like-for-like replacement is the right approach or whether a change of covering makes sense for the building age and local planning expectations. Some properties in conservation-sensitive areas may have specific requirements around materials, and it is worth checking with the local authority before committing to a product.
Flat roofs on extensions, bay windows and garages across this part of Suffolk tend to fail for one of two reasons: the original felt was laid without adequate falls so water ponds, or the covering was simply old three-layer felt that has cracked and shrunk. A new flat roof installation gives you the opportunity to address both problems properly.
EPDM rubber membrane is a durable single-ply option for flat and low-pitch roofs. It is fully bonded to the deck and, unlike older felt systems, copes well with the temperature swings and occasional driving rain that exposed properties in this part of East Anglia experience. The deck itself, usually 18mm or 22mm OSB or plywood, is inspected and replaced where it has absorbed moisture, because bonding a new membrane to a soft deck defeats the purpose of the job.
Falls are created or corrected using tapered insulation boards where the existing structure does not provide adequate drainage to the outlets or drip edge. A flat roof with correct falls typically sheds water within minutes of rain stopping, rather than holding a puddle that eventually finds a way through.
Garages in West Row, Barton Mills and across the Mildenhall area often have corrugated or single-skin asbestos cement roofs, or old three-tab felt that has outlived its useful life. We replace these with purpose-appropriate materials - corrugated bitumen or steel sheet for agricultural-style outbuildings, or EPDM and mineral felt systems for domestic garages where a clean, low-maintenance finish is wanted.
Before any work starts on an older outbuilding, the material type needs to be confirmed. Asbestos cement sheeting requires licensed removal and disposal, which is a separate, regulated process. We will advise on this at the survey stage so there are no surprises on the day work begins.
Working at height is one of the most common causes of serious injury in the construction trades. Beyond the physical risk, incorrectly installed roofs cause problems that are expensive to trace and fix: inadequate overlap leading to capillary water ingress, missing ventilation causing condensation rot, and poorly fixed ridge tiles coming loose in the first winter gale. A roof that is installed correctly should not need revisiting for repairs for many years.
When comparing quotes, check what the specification includes. A quote that covers full strip, new membrane, new battens and all lead work is not comparable to one that retains the existing battens and re-uses the old felt. The cheaper number rarely stays cheaper once the job is underway and hidden problems surface.
Before work starts, we survey the roof and provide a written breakdown of what we propose and why. Scaffolding is erected where required for safe access - for a standard semi-detached house this is normally up before roofing work begins on the first day. The existing covering is stripped and bagged or skipped, timber is inspected, any repairs to the structure are carried out, and then the new covering goes on in sequence.
We clear waste from the site as we go and remove the skip and scaffolding once the job is signed off. The time a new roof takes depends on weather and the complexity of the roof shape. Roofs with multiple hips, valleys or chimney stacks take longer than a simple gable end.
Our work covers Mildenhall and the surrounding towns and villages including Barton Mills, West Row, Kentford, Icklingham, Lackford, Herringswell, Elveden, Cavenham, Risby, Culford and Reach. If you are nearby and not sure whether we cover your area, call us and we will confirm.
A new roof is a significant project and it deserves a proper survey before any price is given. Call us to arrange a roof survey at your property. A clear, itemised quote is worth asking for before you decide.
New roofs on a standard three-bedroom semi-detached house in the Mildenhall area typically cost between £4,500 and £9,000 depending on the roof size, tile choice, structural repairs needed and whether scaffolding is already in place.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.
Active leak, storm damage, slipped tiles or a failed flashing need attention before they get worse. We cover Mildenhall
A full roof replacement is the right call when repairs are no longer cost-effective - whether your tiles are failing, yo
From slipped tiles and cracked flashings to storm damage and leaking flat roofs, we carry out roof repairs across Milden
Flat roofs need the right system and the right installation to last. We work on felt and EPDM rubber flat roofs across M