Mildenhall Roofers provides flat and pitched commercial roofing services to businesses near Worlington, covering warehouse repairs, full roof replacements and everything in between.
Call any time. Calls are answered day and night and passed straight to our roofers.
Whether you manage a farm building, a small industrial unit or a retail premises near Worlington, the roof above it is one of the most expensive assets you are responsible for. Flat felt roofs, single-ply membranes, corrugated sheet roofing on agricultural buildings - each system has different maintenance demands and different failure points. Getting the work done properly from the outset matters far more than finding the cheapest price on the day.
We cover Worlington and the surrounding West Suffolk area. If your premises sit anywhere in this patch, we can survey the roof and talk through your options honestly.
On flat roofs, the common failure points are perimeter details, upstands where the membrane meets a wall or parapet, and any penetrations for pipework or rooflights. Water does not just fall through a hole - it tracks along the underside of a membrane and reappears several metres from where it entered. A proper assessment locates the source, not just the symptom.
On pitched roofs over commercial premises - often steel-framed buildings with profile sheet cladding - corrosion at fixings, failed laps and damaged ridge or eave cappings are the main culprits. Replacing individual sheets is usually straightforward, but a roofer who does not check the fixings and the purlin condition beneath is leaving the next problem behind.
Agricultural roofs bring their own challenges: older asbestos cement sheets that need specialist removal before any replacement work can start, internal condensation causing premature failure of new sheeting if the ventilation is not addressed, and roof lights that leak at the kerb rather than the glazing itself.
This is where most commercial property owners lose money - not through dodgy materials, but through choosing a contractor without asking the right questions first. Here is what to establish before you sign anything.
A quote that says "repair flat roof - £600" tells you almost nothing. A proper written scope specifies which system is being repaired, what materials will be used (torch-on felt, EPDM rubber, single-ply membrane), how failed areas will be prepared, whether the existing substrate is sound or needs replacing, and what edge and upstand details will be addressed. If a contractor cannot or will not provide this level of detail, that is a reason to look elsewhere.
Ask specifically: "What substrate preparation are you including in this price?" Skipping preparation - applying new felt over wet or delaminating insulation boards, for instance - is the single most common cause of premature failure on commercial flat roofs.
Commercial roofing is not the same as domestic roofing. Flat membrane systems behave differently from tiled pitched roofs. If you have a built-up felt roof on a retail unit, ask whether the contractor regularly works with felt systems or whether they mostly do pitched domestic work. There is no shame in a roofer being honest about what they specialise in - the problem is one who says yes to everything.
For agricultural properties specifically, ask whether the contractor has dealt with asbestos cement sheet roofs before. Removal of notifiable materials requires compliance with current regulations, and the work should not be lumped in with the re-roofing quote without clarity on who is responsible for what.
Scaffolding, cherry pickers and roof ladders all have different implications for a working business. A warehouse that cannot operate with a scaffold blocking the loading bay needs a contractor who plans around that. Ask specifically how access will be set up, how long it will be in place, and whether work can be phased to keep part of the building operational. Any contractor who waves this question away has probably not thought it through.
On commercial flat roofs it is not uncommon to strip back the surface layer and find that the insulation beneath is saturated, or that the roof deck itself is softening. Ask the contractor upfront: "If you open up the roof and find the substrate is worse than expected, how do we handle that?" The answer should be clear - they will stop, show you what they have found, explain the options and revise the scope before proceeding. If the answer is vague, push harder.
Torch-on built-up felt systems remain the most common choice for smaller commercial flat roofs in the UK. A two-layer system with a mineral-finish cap sheet is standard, and when installed correctly on a sound substrate, these systems are serviceable for fifteen to twenty-five years before replacement becomes necessary rather than repair.
Single-ply membranes - including EPDM rubber - suit larger or more complex roof geometries and are increasingly specified on new commercial builds. EPDM in particular handles thermal movement well, which matters on metal-framed buildings that expand and contract significantly with temperature changes.
For pitched commercial and agricultural roofs, box-profile and sinusoidal steel sheeting remains dominant. Polyester-coated steel is the standard material; plastisol-coated panels offer better durability in exposed or agricultural environments where ammonia from livestock can degrade coatings faster than normal weathering would.
Repair costs vary widely depending on the system and the extent of failure. A localised felt repair on a small flat roof might cost £300-£600. A full strip and re-felt on a commercial unit of, say, 100-150 square metres would typically sit in the £4,000-£9,000 range depending on substrate condition, insulation specification and access complexity. Agricultural sheet re-roofing on a medium-sized barn runs from roughly £30-£70 per square metre installed, depending on the profile and coating specified.
These are ballpark figures to help you sense-check quotes - not fixed prices. A quote that comes in dramatically lower than these ranges deserves scrutiny: ask exactly what materials are specified and what preparatory work is included.
A good commercial roofer will want to inspect the roof before quoting. Be cautious of anyone who prices the job from the ground or from a quick photograph. On a flat roof especially, the visible surface tells you little about the condition of the insulation and deck beneath. Call us to arrange a roof survey for your commercial property near Worlington - we will tell you what we find and what your realistic options are.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.