If your walls are showing signs of damp, cracking or tired render, exterior cladding fitted by Mildenhall Roofers could be exactly what your Beck Row home needs.
Call any time. Calls are answered day and night and passed straight to our roofers.
Most homeowners notice a problem with their walls long before they understand what is causing it. A patch of damp inside a bedroom, paint bubbling on a gable end, or render that has gone from hairline cracks to chunks falling away - these are not cosmetic nuisances. They are signs that your external wall is no longer doing its job. Exterior cladding addresses the root cause by creating a weather-resistant skin over the wall structure.
We fit timber, composite, fibre cement and metal cladding systems to homes in Beck Row and across the Mildenhall area.
The following signs suggest your external walls need attention. Some point specifically to failing render or masonry; others suggest that existing cladding has reached the end of its useful life.
The underlying causes fall into a few categories. Understanding them helps you choose the right cladding system rather than simply covering up a problem that will keep getting worse.
Failed or thin render is probably the most common cause of wall dampness in older properties. Sand and cement render applied without a reinforcing mesh will crack as the building moves slightly with temperature changes. Once cracked, it acts as a water trap rather than a water repellent - water gets in through the crack but cannot easily drain back out.
Inadequate cavity wall construction affects properties built before the widespread adoption of cavity walls. Solid walls rely entirely on their depth and the permeability of their surface to manage moisture. When that surface fails, there is no second line of defence.
Cold-bridge condensation occurs where an uninsulated wall allows warm indoor air to cool rapidly at the wall surface. Mould growth on internal plaster is often a symptom. Adding a cladding system with an insulated backing board breaks the cold bridge and dramatically reduces this kind of condensation.
Poor detailing at penetrations - windows, vents, pipes, meter boxes - causes many localised failures. Water always finds the path of least resistance, and any gap where a different material meets the wall surface is a potential entry point. A properly installed cladding system includes flashing and trim details at every penetration.
Painting over damp render or patching spalled brickwork buys time, but it rarely fixes the underlying problem. Cladding works differently: it creates a ventilated rain-screen over the existing wall. Rain hits the outer face of the cladding, runs down and drains at the base. Any small amount of moisture that gets behind the cladding can dry out through the ventilated cavity rather than soaking into the structure.
When a thermal insulation layer is included behind the cladding boards - which it often is on a full re-clad - the wall gains both weather protection and significantly improved thermal performance in a single operation. Properties that have had cladding installed with insulation backing typically see a noticeable reduction in heating costs, though the exact saving depends on how poorly insulated the original wall was.
Damp problems in walls tend to get worse, not better. Each winter puts more stress on already compromised render or brickwork. If you can see spalling, blown render or persistent damp, getting a proper assessment before the next cold season is sensible. Leaving it another year rarely saves money - it usually means more preparation work is needed before the cladding can be fixed.
If you have spotted any of the warning signs above on your Beck Row property, call Mildenhall Roofers to arrange a site visit so we can assess the wall condition and talk through the right cladding system for your situation.
Before any boards go up, the existing wall surface needs to be assessed and prepared. Loose render is hacked off. Spalled brickwork is made good. Any areas of active damp are identified and, where possible, the source is addressed rather than simply covered. Fixing battens are then fixed to the wall at the correct centres for the chosen cladding board, and these must be plumb and level - no cladding system looks right if the substrate is not true.
Insulation boards are fitted between or behind the battens where thermal improvement is required. The cladding boards themselves are then fixed according to the manufacturer's instructions for that specific system - different materials require different fixing methods, expansion gaps and edge details. Trim pieces, corner sections and window surrounds are fitted last, and all penetrations are properly flashed.
Before accepting any quote for exterior cladding, ask the contractor how they will handle the existing wall surface, what preparation work is included, how junctions at windows and doors will be detailed, and whether the insulation (if included) will be fixed mechanically or adhered. A contractor who cannot answer these questions clearly is one to avoid.
We work in Beck Row and across the Mildenhall area, including neighbouring villages. Call us to book a no-pressure site assessment and get an honest picture of what your walls need.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.