If your flat roof in Worlington needs replacing or repairing, choosing the right contractor is the single decision that determines whether the job lasts or fails within a few years.
Call any time. Calls are answered day and night and passed straight to our roofers.
A flat roof is not truly flat - it is laid to a slight fall, typically around 1:80 minimum, so rainwater drains towards outlets rather than pooling. Getting that fall right during installation is one of the most important parts of the job. Too shallow and water sits, degrades the membrane and eventually finds a way in.
On garages, extensions and outbuildings across the Worlington and Mildenhall area, we install and repair flat roofs using two main systems: EPDM rubber membrane and traditional felt. Each has its place depending on the roof size, the structure beneath it and the budget available. EPDM is a single-ply rubber sheet bonded or mechanically fixed to the deck. It is flexible, handles temperature changes well and is installed without open flame. Felt systems - typically torched-on mineral felt laid in two or three layers - are a tried and tested approach with a long track record on residential roofs.
The deck itself matters too. A failing flat roof often has a damaged or rotten timber deck underneath. Any honest contractor will lift the existing covering, inspect the deck boards or plywood and replace any sections that have softened before laying the new membrane. Skipping that step means the new roof fails prematurely regardless of how good the membrane is.
The roofing trade has no licensing requirement in the UK, which means anyone can call themselves a roofer. That makes it your responsibility to ask the right questions before any work starts. Here is what to ask and what to listen for.
A contractor should be able to explain which membrane system they are recommending for your roof and give you a clear reason. If they cannot tell you whether they are quoting felt or EPDM, or why one suits your roof better than the other, that is a concern. The system affects how long the roof is likely to perform and what maintenance it will need. You should not have to guess what you are buying.
As noted above, the deck is often where the real damage lies. Ask whether the price includes stripping back the existing covering, inspecting the deck and replacing any damaged sections. Some quotes look cheap because they price over the top of an existing layer without stripping. That approach traps moisture and almost always causes problems. A stripped-back job allows you to see what you are actually getting.
Ask how they will achieve the correct drainage fall, particularly if your roof is large or drains towards a parapet wall. Ask where the outlet is and whether it is being replaced or cleaned out. Blocked outlets are one of the most common causes of flat roof failure, yet they take minutes to sort when the roof is already stripped.
A clear written quote should list the materials being used (membrane type and specification), what stripping and disposal is included, whether the fascia boards or timber upstands are part of the price, and the planned timescale. Anything not in writing can become a dispute later. If a contractor quotes verbally and says they will sort the paperwork afterwards, ask for the written version before you agree.
Three quotes is the standard advice, and it holds. But comparing quotes is only useful if they describe the same scope of work. A quote that includes deck replacement, new lead flashing at the abutment wall and a two-layer EPDM system is not the same as a quote that laminates a new felt layer over an existing one. Ask each contractor to specify what they are including. The cheapest price on paper is not always the cheapest outcome.
For a straightforward garage flat roof replacement in Suffolk, EPDM installation typically costs in the region of £70-£120 per square metre depending on deck condition and access. Felt replacement on a similar area tends to come in slightly lower. Quotes well below those figures are worth scrutinising carefully.
Where a flat roof meets a wall - on an extension abutting the main house, for example - the junction is sealed with lead flashing. This is one of the most failure-prone areas on any flat roof. The flashing should be cut into a mortar joint (called chasing), dressed down over the upstand of the membrane and sealed. A contractor who simply sticks flashing to the surface of a rendered wall with mastic is cutting corners. Mastic alone does not hold long term.
Ask specifically how the wall junction will be finished and whether new lead is included or whether existing lead will be reused and re-dressed. If existing lead is being re-used, it should be in sound condition and properly re-secured.
We cover Worlington and the surrounding villages. Garages in particular often have felt roofs that are decades old and well past the point where patching makes financial sense - at that stage, a full replacement with EPDM gives a much longer service life.
If you are not sure whether your roof needs repair or replacement, call us and we will come out and take a look. We will tell you honestly what we find and give you a clear written price before any work is agreed.
If your flat roof is leaking, blistering, or simply looks tired and you are not sure what to do next, call Mildenhall Roofers for a straightforward assessment and written quote. We cover Worlington and all nearby villages across this part of Suffolk.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.