Mildenhall Roofers carries out all types of roof repairs in Red Lodge - and this page explains what to do while you wait for a roofer to arrive, and which DIY fixes can make things worse.
Call any time. Calls are answered day and night and passed straight to our roofers.
When a roof develops a problem - whether it is a sudden storm leak or a tile you have just noticed is missing - there is always a gap between spotting the damage and getting a roofer on site. What you do in that time can make a real difference to the scale of the repair and the condition of your home when help arrives. This page covers what to do, what to avoid, and what our repair service covers across Red Lodge and the surrounding area.
We carry out all types of domestic roof repairs in Red Lodge and the surrounding area. The work covers slipped, cracked or broken tiles and slates, lead flashing failures around chimneys, dormers and pipe penetrations, ridge and hip tile re-bedding and repointing, flat and garage roof repairs in felt and EPDM rubber, storm damage to pitched roofs, chimney stack repointing and flaunching, and repairs to commercial and outbuilding roofs where appropriate.
A single missing tile or cracked slate should never be left. Water can reach the timber structure within hours during heavy rain, and once the rafters or sarking boards become saturated, the repair cost increases significantly.
The priority in the hours and days after discovering a roof problem is to limit water damage inside the property, not to fix the roof yourself. Here is what is genuinely useful to do.
If water is coming through the ceiling, put down buckets or towels and move anything valuable out of the affected room. If the ceiling is bulging, it has collected water above it. Keep everyone out of the room and do not poke, prod or pierce it - it can come down without warning.
If it is safe to do so, get into the loft space with a torch. You may be able to see where water is entering, which gives the roofer useful information when they arrive. Note the location relative to a chimney, a valley, the ridge, or a particular slope. If the water is pooling on the insulation, place a bucket or container where it is dripping onto the joists. Wet insulation loses its effectiveness and can harbour mould if it stays damp, so moving it away from standing water helps.
A photograph from the garden or an upstairs window can help the roofer assess access requirements and materials needed before they arrive. If you can clearly see a missing tile, a displaced ridge tile, or damaged flashing, photograph it. Do not lean out of windows or go onto any roof surface to get a better angle.
In situations involving significant storm damage, a roofer may place a temporary heavy-duty polythene sheet over the affected area before carrying out a full repair. This is a proper, securely fixed covering - not a loosely draped tarpaulin. If a temporary cover is placed, leave it alone. Do not attempt to adjust it or add to it, as this can break the fixing points and reduce its effectiveness.
This is where many homeowners make the situation worse with the best of intentions. Several common DIY roof repairs either fail quickly or create new problems that make the professional repair harder and more expensive.
Working at height on a roof slope without proper equipment and training is genuinely dangerous. Roof tiles are often more slippery than they look, particularly when damp or covered in algae. A lean-to ladder resting against the guttering is not safe access - it can pull the guttering away from the fascia and does not give a stable working position. Falls from roofs cause serious injuries every year. The risk is not worth taking for a temporary fix that a professional will likely need to redo anyway.
Roof sealants and waterproofing paints sold in DIY shops are often applied to the wrong surface or to a surface that is too wet, dirty, or structurally unsound for them to bond properly. They can also trap moisture underneath, which accelerates rot in timber and mortar decay in ridge tiles. More significantly, a roofer arriving to find sealant smeared over an area of damage has a harder job identifying the true extent of the problem. What was a straightforward tile or flashing repair can become more complicated when someone has already tried to seal over it.
Even if you can reach the affected tile from a ladder, re-fixing a slipped tile from below without proper roof access is rarely successful. Tiles are held by nails into the batten and gravity, and positioning them correctly requires working from above. Pushing a tile back from below often leaves it not properly seated, which means it will slip again in the next wind. In the process, it is also easy to crack adjacent tiles.
A small drip during heavy rain that seems to stop when the rain does is not self-resolving - it simply means the leak is slow enough that the water evaporates or soaks away before the next rainfall. The damage to the roof timbers and insulation is cumulative. A leak that has been present for a season will have caused more structural damage than one that is dealt with promptly.
When a roofer arrives to assess the damage, they should access the roof at the correct level - not just look from the ground or loft hatch. A proper inspection from roof level allows them to check the condition of tiles, mortar, flashings and felt that are not visible from anywhere else. They should show you photographs of what they find before quoting and specify the materials they intend to use. A written quote with a breakdown of the work is a reasonable expectation before you commit to anything.
As a guide, replacing a small number of broken or slipped tiles is typically £150 to £350 including access. Lead flashing repairs start from around £200 to £450 depending on the run. Ridge tile re-bedding on a standard semi-detached roof is typically in the region of £450 to £950. Flat roof patch repairs vary widely by area and system, starting from around £150 to £300 for a small isolated repair on a felt roof. These are typical UK figures and not specific quotes - your job will depend on the specifics of your roof and access requirements.
If you have a leak, storm damage, or anything on your roof you are unsure about, call a local roofer to book a roof survey. A good roofer will inspect the roof from the correct access level, show you what they find, and give you a written quote for the work, with no pressure to proceed on the day.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.