Mildenhall Roofers carries out roof repairs of all sizes in West Row, using the right materials for the job whether that is pitched tiling, slate, lead flashing or a flat roof covering.
Call any time. Calls are answered day and night and passed straight to our roofers.
Not every roof repair is straightforward, and one of the most important decisions is which material to use. Replacing a broken tile with the wrong type, or patching a flat roof with an incompatible product, can create new problems rather than solving the existing one. This page walks through the main materials used in roof repairs, their strengths and their limitations, so you can have a more informed conversation with any roofer.
We cover West Row, Mildenhall and a wide area including Holywell Row, Barton Mills, Icklingham, Cavenham and Culford. If you are not sure what material your roof uses or what your options are, call us to arrange a survey.
Concrete interlocking tiles are one of the most common pitched roof coverings on homes built from the mid-twentieth century onwards. They are robust and relatively affordable to replace, and a reasonable colour match is usually possible from tile merchants. The main limitation is that concrete tiles fade over time, so a new tile in the same product line will often look noticeably brighter than the surrounding roof.
On the practical side, concrete tiles are heavier than clay or slate. If a significant number need replacing and the battens or felt below are also aged, the extra loading needs to be considered. For a like-for-like repair of a few tiles, concrete is the sensible choice where it matches the existing roof.
Clay plain tiles are found on older properties and on roofs where a more traditional appearance is wanted. They weather well and their colour tends to stabilise rather than fade dramatically. The downside is that matching an existing clay tile on an older roof can be difficult. Tiles vary by region, manufacturer and era, and the wrong size or profile will not interlock correctly with what is already there.
If you have a clay-tiled roof and need repairs, it is worth asking a roofer to source matching second-hand tiles where an exact new match is not available. A salvage yard match will blend in far better than a close-but-not-quite new tile.
Natural slate is one of the longest-lasting roofing materials available. The practical issue with repairing a slate roof is matching the thickness and colour of the existing slates. Welsh slate tends to be a grey-blue colour; Spanish slate is often darker and can be slightly thicker. Mixing the two on the same roof looks wrong and can affect the way water sheds.
Slates are fixed either with copper or stainless steel nails through pre-punched holes, or in some older systems with a hook or tingles. Tingle repairs are a traditional technique for replacing a single slate without disturbing the course above, using a small lead or copper strip as a fixing. A roofer who knows their materials will choose the right method rather than defaulting to a quick fix that leaves the slate vulnerable to the next storm.
Reclaimed natural slate is available and is often the best option for matching an existing roof. The quality varies, so it pays to check that any second-hand slates are not delaminating or already soft before they go on the roof.
Fibre-cement artificial slates have improved considerably and are now widely used on new roofs and re-roofs where a slate appearance is wanted without the cost of natural material. They are lighter than natural slate, consistent in size and thickness, and readily available.
The limitation for repairs is appearance. On a roof of natural Welsh slate, an artificial replacement will look different in colour and texture, at least until it weathers. On a full re-roof or where matching does not matter, artificial slate is a practical and cost-effective choice.
Lead remains the standard material for flashings at chimneys, dormers, abutments and valleys. It is malleable enough to be dressed to almost any shape, it lasts for many decades when correctly specified and fitted, and it can be repaired in sections rather than having to be fully replaced.
Code 4 lead (1.8mm thick) is the minimum for most flashings on a pitched roof; valley gutters and soakers typically require Code 4 or Code 5. Thinner lead wears through more quickly and is more prone to cracking at bends. If a contractor quotes for lead flashing and does not mention the code, it is a reasonable question to ask.
Lead flashing must be fixed with lead clips, not mortar alone. Mortar holds the lead in place but it does not flex with the lead as it moves. Clips allow the lead to expand and contract while keeping it secured. Incorrect fixing is one of the most common reasons a flashing fails within a few years of being replaced.
For flat roofs on garages, extensions and single-storey outbuildings, the two most practical repair and replacement systems are torch-on felt and EPDM rubber membrane. Each has genuine advantages and real limitations.
For a small patch repair on an existing felt roof that is otherwise in reasonable condition, a patch using compatible felt or lap sealant can extend the life of the covering. If the existing felt is cracked across most of its surface or has multiple blisters, a full re-cover is the better value decision.
Chimney stacks use a combination of materials: the brick or stone of the stack itself, mortar in the pointing and the haunching, and lead or sometimes a proprietary flashing system at the base. When a chimney leaks, it is usually the haunching mortar or the flashing that has failed rather than the brickwork itself.
Repointing a chimney stack uses a lime mortar mix on older properties, not the stronger cement mortars used in modern construction. Hard cement mortar on soft Victorian or Edwardian brick will crack the brick face rather than flex with the movement of the stack. Using the right mortar matters for the long-term stability of the chimney.
Whatever the repair, it pays to ask what specific material will be used, what grade or code it is, and why that choice suits your particular roof. A good roofer will explain this without hesitation. We are happy to talk through the options for any job in West Row, Holywell Row, Mildenhall or nearby. Call us to book a survey.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.