Urgent leak or storm damage? Call 01638 597994 - answered day and nightUrgent leak? Call 01638 597994
Mildenhall Roofing Specialists
01638 597994 Get a Quote →

Roof Replacements in Isleham

When your roof in Isleham reaches the point where repairs are no longer holding it together, a full replacement is the most cost-effective decision you can make.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01638 597994
Roof Replacements · Isleham

Expert Roof Replacements
in Isleham

When Repairs Stop Being Enough

Most roofs do not fail overnight. The process is gradual, and the warning signs are easy to miss or misread as something minor. Understanding what those signs mean, and what is causing them beneath the surface, is the difference between catching a problem early and finding yourself facing serious structural damage.

A full roof replacement is the right response when the roof has reached the end of its serviceable life, when storm damage has gone beyond what spot repairs can address, or when the felt underlay has broken down and moisture is getting into the roof structure. At that stage, patching individual tiles or sections only delays the inevitable and often costs more in the long run.

Warning Signs You Should Not Ignore

The most obvious sign is a leak, but by the time water is coming through your ceiling, the problem has usually been developing for some time. These are the signs worth paying attention to before it reaches that stage.

  • Damp patches on ceilings or in the loft: These appear when the felt underlay has perished and water is tracking through. Felt does not fail suddenly. It dries out and cracks over many years, especially on south-facing or exposed pitches.
  • Daylight visible in the loft: If you can see light between tiles or at the ridge when standing in the loft, water is finding the same route in. Check for this on a bright day.
  • Lifted, cracked or slipped tiles: Individual tiles slip or crack for various reasons, but if it is happening across multiple areas of the roof, the battens beneath are often the real problem. Timber battens can rot over decades, and when the fixings fail, tiles move.
  • Sagging or uneven roof lines: A roof that looks wavy or bowed from the ground is a structural concern. It usually points to damaged or rotten rafters or decking boards, which means the roof covering has been letting in moisture for long enough to affect the timberwork underneath.
  • Granule loss on flat roof felt: On flat roof sections, the mineral surface of the felt breaks down and the material becomes brittle. You may see granules in the gutters, bubbling across the surface, or visible splits and cracks in the felt.
  • Recurring leaks despite repairs: If the same section of roof has been repaired more than once and the problem keeps returning, the fault is usually systemic rather than localised. The roof has reached the end of its working life.
  • Failed or crumbling mortar: At the ridge and at hip junctions, tiles are bedded in mortar. When that mortar weathers and cracks, ridge tiles become unstable and the roof becomes vulnerable to wind lift. This is common on roofs that are thirty or more years old.

What Causes a Roof to Fail

Roofing materials have a finite lifespan, and most residential roofs installed before the 1990s are now reaching the end of it. Concrete interlocking tiles, which were widely used from the 1970s onwards, can last forty to fifty years but become porous and heavy as they age. Clay tiles last longer but the fixings and the felt beneath them do not always match that lifespan.

A common problem on older roofs is that the felt used as an underlay was a single-layer bitumen product. This type of felt becomes brittle with age and heat cycling. Once it cracks, it can no longer redirect water that gets under the tiles, and that moisture tracks down into the loft. The tiles above may look perfectly intact while the underlay has been failing for years.

Storm damage accelerates this process. Wind gets under lifted tiles and forces water into gaps that would otherwise shed it safely. Once a tile slips or breaks and is not replaced quickly, the exposed felt and batten take on moisture and begin to deteriorate much faster.

Lead flashing at chimney stacks, dormers and valleys is another common failure point. Lead does expand and contract with temperature changes, and over time the fixings and pointing around it work loose. When the flashing lifts, even slightly, water tracks straight down the wall or into the roof structure. A new roof is the right time to replace or re-dress all the flashing at the same time.

What a Full Roof Replacement Involves

We strip the existing roof covering completely back to the timber structure. This means removing all tiles or slates, lifting the old felt and taking up the battens. Once the structure is exposed, we can properly assess the rafters, decking and any areas of rot or damage that were hidden beneath.

Any rotten timber is cut out and replaced before the new roof is built up. We fit a modern breathable membrane in place of the old felt, which manages moisture vapour more effectively and lasts significantly longer. New treated timber battens are then fixed, and the new tiles or slates are laid from the eaves up.

Ridge tiles are either re-bedded in fresh mortar or, where appropriate, fitted using a dry-fix ridge system, which is mechanically fixed and does not rely on mortar that can eventually crack and fail again. Verge details, hip tiles and any flashings are all completed as part of the same job.

On flat roof sections, we replace perished felt with EPDM rubber membrane, which is a single-ply system that is bonded or mechanically fixed to the deck. EPDM handles temperature variation well and does not rely on the surface granules that felt systems lose over time.

Typical Costs for a Roof Replacement

For a standard semi-detached or detached house, a full roof replacement using concrete or clay tiles typically costs between £5,000 and £12,000, depending on the size of the roof, the condition of the underlying structure and the specification of the tiles chosen. Slate roofs, whether natural Welsh slate or a good quality synthetic alternative, tend to cost more because of the material cost and the additional time required to lay them correctly.

Flat roof replacements using EPDM rubber membrane are typically priced between £60 and £100 per square metre fitted, depending on the size and accessibility of the roof and whether the deck needs replacing beneath.

These are indicative figures. The real cost depends on what is found once the old roof is stripped. A roof that looks straightforward from the ground sometimes reveals rotten rafters or a deck that needs significant remedial work. Any responsible roofing contractor will give you a clear account of what has been found and what additional work is needed before proceeding.

What to Ask Before Work Starts

Before agreeing to a replacement, ask the contractor to explain exactly what they found on their inspection and why a replacement is the right decision rather than an extended programme of repairs. A good roofer will be able to show you photographs from the loft or from the roof itself.

Ask what specification of tile or membrane is being proposed and why. Tile weight matters on older roof structures, and not every replacement tile is compatible with the existing batten spacing or rafter design. Ask whether all the flashing will be replaced as part of the job, and whether the guttering and fascia boards will be checked and reported on while the scaffolding is in place.

Find out how the site will be managed. A full roof strip generates a significant volume of waste material, and that needs to be cleared from site properly.

Serving Isleham and the Surrounding Area

Mildenhall Roofers carry out roof replacements in Isleham and across the surrounding villages and towns, including Mildenhall, Barton Mills, Icklingham, Cavenham, Lackford, West Row, Herringswell and Elveden. If your roof is showing any of the warning signs described above, the right first step is a proper inspection from the roof level, not a kerb-side estimate.

Call us to arrange a roof survey and we will give you a straightforward assessment of what the roof needs and what it will cost.

Why choose Mildenhall Roofers?

  • Free survey and itemised quote
  • Fixed price - no surprises
  • Local team

Get your free quote

No obligation · We'll call you to arrange a free visit

By submitting you agree to being contacted about your enquiry. No spam, ever.

Urgent leak or storm damage?

Call any time. Calls are answered day and night and passed straight to our roofers.

Call now: 01638 597994