After a chimney rebuild in Red Lodge, a few straightforward maintenance habits will protect the work and help you avoid the same problems coming back.
Call any time. Calls are answered day and night and passed straight to our roofers.
Mildenhall Roofers carry out chimney rebuilds for homeowners in Red Lodge and the villages nearby. A rebuild means taking the stack down to sound brickwork, rebuilding with matching brick and mortar, fitting new lead flashing at the roof junction and re-setting the chimney pots in a fresh haunch. The result is a stack that is structurally solid and fully sealed against water entry. Where a full rebuild is more than is needed, we carry out repairs - repointing, haunch replacement or lead flashing work - and we will tell you honestly which is appropriate.
A chimney that is leaking or failing structurally lets water into the roof timbers and the internal walls, sometimes tracking all the way down to the chimney breast inside. If the flue is in use - for a wood burner, an open fire or a solid fuel range - a deteriorating stack can also compromise the flue lining and create a safety risk. Sorting the stack and then having the flue swept and checked before relighting the appliance is the correct sequence.
Understanding why chimneys fail is the most useful starting point for keeping one in good condition after a rebuild. Most failures come down to three things: water getting into open mortar joints and freezing, mortar that was the wrong mix for the brick type, and flashing that has worked loose and let water run behind it. All three are preventable or at least detectable early with routine attention.
Chimney stacks are exposed on all four sides and take the full force of wind-driven rain in a way that no other part of a pitched roof does. Soft handmade bricks used in older stacks absorb moisture; if the mortar is too hard - as modern bagged mortar often is - the frost movement is taken out in the brick face rather than the joint, causing spalling. The correct mortar mix, suited to the brick type, is a fundamental part of any rebuild and has a direct bearing on how long the work lasts.
A newly rebuilt chimney needs a settling period. Mortar cures and stiffens over months, and the stack goes through a first winter of temperature cycles and frost. There are a few things worth checking yourself during that first year.
If the chimney serves any kind of fire or stove - whether that is a wood burner, an open fire or a solid fuel appliance - the flue must be swept regularly. A chimney sweep removes creosote, soot and debris from the flue lining, which reduces the risk of a chimney fire and keeps the draw working properly. For wood burners burning seasoned logs, an annual sweep is generally sufficient; for open fires or appliances burning solid fuel, twice a year is the standard recommendation.
Burning well-seasoned or kiln-dried wood produces far less tar and creosote than wet or unseasoned fuel. Logs that have been split and dried for at least a year, or kiln-dried wood sold with a moisture content below 20%, burn hotter and cleaner. This is one of the most practical things a wood burner owner can do to slow the build-up of deposits in the flue and reduce the frequency at which the sweep finds heavy tar contamination.
A chimney sweep will also tell you if they can see any debris at the base of the flue - a sign that something has come loose inside the stack - or if the draw seems weak. Weak draw can mean a partial blockage, a cracked liner or a stack that has settled in a way that is affecting the flue profile. Catching these things during a routine sweep is far cheaper than discovering them after a chimney fire or a blocked flue emergency.
Burning the wrong fuel does lasting damage to a flue and, over time, to the stack itself. Household waste, treated timber, coal mixed with damp wood and green logs all produce more tar, more acids and more particulates than seasoned wood or the correct solid fuel for your appliance. Acids in the flue gases attack the mortar in the flue lining and, if the lining is permeable or cracked, reach the brickwork of the stack itself.
If you have a wood burner registered under DEFRA's Smoke Control exemption or operating under the Ecodesign regulations, burning the specified fuel types is not just good practice - it is what the appliance is designed for and what its performance depends on. Using the right fuel protects the appliance, the liner and the stack above it.
Autumn is the sensible time to check the chimney before the heating season begins. A dry summer can leave mortar more brittle and hairline cracks more open than they were in spring, because the stack dries out unevenly and the mortar shrinks slightly. Before lighting the first fire of the season, check the following.
A chimney sweep for a single flue typically costs between £50 and £90 depending on the chimney type and fuel used. A chimney inspection using a CCTV camera to check the flue lining costs more - typically £100 to £200 - but gives a definitive picture of the liner condition and is worth doing on any stack that has not been inspected recently or where there is any doubt about the liner after a rebuild. Catching a cracked liner early avoids the cost of a flue fire and the more extensive work that follows one.
Having the outside of the stack inspected every two or three years - from scaffold or a roof ladder, not just from the ground - means any repointing needed is caught before it becomes a rebuild. A small amount spent on fresh mortar to isolated joints every few years costs far less than a full scaffold-and-rebuild job.
Mildenhall Roofers work in Red Lodge and the surrounding villages. If your chimney needs a rebuild, a repair or just a close-up inspection to see what state the stack is in, call us and we will arrange a survey.
Call Mildenhall Roofers to book a chimney inspection in Red Lodge.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.