If your chimney stack in Worlington is crumbling, leaning or letting in water, a chimney rebuild from Mildenhall Roofers will make it structurally sound and weathertight again.
Call any time. Calls are answered day and night and passed straight to our roofers.
A chimney rebuild is not a cosmetic job. When a stack has reached the point where repointing or patching will not hold, the only proper fix is to take it down to sound brickwork and build it back up again. We use matching brick and mortar so the finished stack ties in with the rest of the house, and we re-bed the lead flashing from scratch so the junction between the stack and the roof slope is fully weathertight.
A failing chimney lets water into the roof structure, down into the internal walls and, if the flue is still in use, can compromise the lining. On a chimney that serves a solid fuel appliance, a wood burner or an open fire, that is a safety issue as well as a water damage problem. The stack and the flue need to work together, so any rebuild should be followed by a chimney sweep and a flue inspection before the appliance goes back into service.
Not every chimney with problems needs a full rebuild. Sometimes repointing alone is enough. But when the brickwork itself has deteriorated or the stack is moving, rebuilding from the flashing line upwards - or in serious cases from roof level or lower - is the only lasting answer.
This is the part most homeowners find difficult. Every roofer will tell you they do chimney work, but chimney rebuilds are a specific skill. Here is what to ask any contractor before you sign anything or hand over a deposit.
A proper contractor will tell you exactly how far down the stack they intend to go and why. If they plan to rebuild from the flashing line upwards, they should be able to show you where the sound brickwork ends. If the brickwork below the flashing line is also compromised, that has to come down too. Be wary of anyone who gives you a price without getting onto the roof or using a ladder to inspect at close range - you cannot assess a chimney stack properly from the ground.
Mismatched mortar is one of the most common problems on chimney repairs. Ordinary bagged mortar from a builders merchant is often too hard for older handmade or soft-fired bricks, and a hard mortar joint will cause the brick face to spall in frost rather than letting the joint absorb movement. Ask specifically what mortar mix they intend to use, and whether they have checked your existing brick type. On older properties, a lime-based mortar is frequently the right choice.
A chimney rebuild means the existing flashing almost always has to come off. When the stack is rebuilt, new lead should go in. If a contractor proposes to reuse the old lead flashing after rebuilding the stack, ask why. Old flashing that has been removed and re-bedded does not seal as well as new lead cut and dressed to the fresh brickwork. New Code 4 lead flashing is the standard for most residential stacks.
If your chimney serves a wood burner, a solid fuel range or an open fire, the flue condition matters as much as the stack. The rebuild is the right moment to have the flue lined or re-lined if it needs it. Ask whether the contractor carries out flue lining or works with a chimney sweep who can advise. Pots should be re-set in a proper haunch - a solid mortar bed that sheds water away from the top of the stack - not just stood back on whatever is convenient.
Scaffold or a tower gives the contractor a stable working platform and reduces the risk of tiles being damaged during the rebuild. Ask what access arrangement they intend to use. Inside the house, dust sheets in the fireplace opening and on nearby floors are basic good practice when debris is coming down the stack.
A price that is just a single number tells you nothing. A written breakdown should include: access (scaffold or tower hire), the extent of brickwork to be removed and rebuilt, materials (brick, mortar, lead flashing and pots), and disposal of the old material. That way, if something changes once they get up there - more brickwork is rotten than visible from outside, for instance - you have a clear basis for any variation.
For a typical single residential stack rebuilt from the lead flashing line upwards, with new lead flashing and re-set pots, UK prices generally run from around £800 to £1,800 depending on the height of the stack, the number of flues, the brick type and whether scaffold needs to be erected and struck separately. A taller stack or one that requires a larger scaffold lift will cost more. Stacks that need rebuilding from below the flashing line, or where the chimney breast itself is involved, will cost considerably more and may require structural input. These are honest typical ranges and your actual quote will depend on what the inspection finds.
If the chimney is in use - or will be brought back into use after the rebuild - it needs sweeping and ideally a camera inspection of the flue before the appliance is lit. A sweep will clear any debris that has fallen during the rebuild and confirm the flue is clear and drawing properly. For wood burners and solid fuel appliances, an annual sweep is the standard recommendation and many home insurance policies require evidence of sweeping. If you are a landlord in villages around Mildenhall - including Worlington - and you let a property with a working flue, getting that flue swept and obtaining a certificate before each tenancy is good practice and protects you if there is ever a fire-related claim.
Mildenhall Roofers work across Worlington and the nearby villages including Freckenham, Isleham, Kennett and Icklingham. If your chimney needs a close-up inspection before you decide what to do, call us to arrange a survey. We will tell you plainly what we find and what the options are before you commit to anything.
Call Mildenhall Roofers to arrange a chimney inspection in Worlington.
No obligation · We'll call you to arrange a free visit
Call any time. Calls are answered day and night and passed straight to our roofers.